Jinko 10kW Three Phase Hybrid Inverter

This 10kW three-phase hybrid inverter — the Jinko JKS-10K-SG04LP3-EU — is built for the electrical standard most Kenyan shops, offices, workshops, and larger estates actually run on. If your distribution board shows three live wires plus a neutral, this is the inverter your building needs; a single-phase inverter simply won't connect to a three-phase supply correctly. It delivers a rated 10,000W continuously, with a peak off-grid output of 20,000W for 10 seconds — enough surge capacity for motor-driven equipment like water pumps, compressors, and refrigeration units that single-phase systems often struggle with.

With 2 MPPT trackers accepting up to 13,000W of solar panel input against its 10kW rated output, the inverter is deliberately oversized on the DC side — a sensible design choice that keeps it producing closer to full output through more of the day, not just the brief midday peak. It supports up to 100% unbalanced output on each phase (with a per-phase cap of 50% of rated power), so a heavier load on one phase (like refrigeration) doesn't unbalance or strain the system. With a 240A charge/discharge current and compatibility with both lithium (LiFePO4) and lead-acid batteries at 48V, it's built to pair with serious battery banks for genuine overnight backup. Every unit Greenvion sells is warranty-backed, and our EPRA-licensed team can install and configure this 10kW three-phase inverter correctly as part of a complete commercial solar system — book a free site assessment to confirm your building's phase type and load before committing, or request a quote for current pricing.

Key Specs:

• Rated output power: 10,000W continuous, three-phase | Max AC output power: 11,000W
• AC output rated current: 15.2A | Max AC current: 22.7A | Max continuous AC passthrough: 45A
• Peak (off-grid) output: 20,000W (2× rated) for 10 seconds
• AC output: 380V/400V three-phase + neutral (4-wire)
• Max PV input power: 13,000W (1.3× DC-to-AC oversizing)
• PV input voltage: 550V rated (160–800V range) | MPPT voltage range: 200–650V | Start-up voltage: 160V
• PV input current: 26A + 13A (per tracker) | Max PV short-circuit current: 34A + 17A
• MPPT trackers: 2 (2+1 strings)
• Battery compatibility: 48V lithium (LiFePO4) & lead-acid
• Max charge/discharge current: 240A
• Max efficiency: 97.6% | MPPT efficiency: 99.9%
• Unbalanced output: Up to 100% per phase, capped at 50% of rated power per phase
• THD: <3% (linear load <1.5%)
• Time-of-use scheduling: 6 programmable periods
• Protection: IP65, integrated surge/short-circuit/over-current/anti-islanding protection
• Dimensions: 540 × 670 × 220 mm | Weight: ~38kg
• Manufacturer warranty: 5 years standard

For Kenyan businesses running on a three-phase supply, the Jinko JKS-10K-SG04LP3-EU delivers commercial-grade power and room to scale — installed and warranty-backed by Greenvion.

Box Contents

• Jinko JKS-10K-SG04LP3-EU hybrid inverter
• Wall-mounting bracket
• Battery connection terminals and cable connectors
• User manual and quick installation guide